European Cup live

How to start the engine: How to start the engineAnd step-by-step engine start is European Cup livea basic skill that must be learned before driving, whether it is a motor vehicle or a ship. The following will introduce the starting methods and steps of automobile and ship engines. Car engine start-up method and steps 1. Insert the key. When the vehicle enters the parking space, hang the vehicle into idle gear, pull up the handbrake, insert the key and push it into the keyhole. Two. Open the car door. If the door is manually locked, you need to press the button next to the door to open all the doors. If the door is an electric lock, just press the unlock button of the driver's left door. 3. Adjust the seat and rearview mirror. Adjust the height, front and rear, direction and angle of the rearview mirror of the seat according to your own needs. Four. Step on the clutch. Stepping on the clutch is to prevent the vehicle from moving forward directly after the engine starts. 5. Put down the handbrake. Lowering the handbrake is so that the vehicle can drive freely.6. Check the dashboard. Be sure to check the dashboard before driving. The purpose is to confirm the fuel volume, water temperature and surface condition of the engine fault light of the vehicle. 7. Start the engine. Turn the key to the thick coil position and hear the fault light on the dashboard go out. Turn it to the thin coil position to start the engine. Eight. Release the clutch. When the engine starts, release the clutch and step on the accelerator to enter the road at a steady speed. Ship engine start-up method and steps 1. Turn off the electrical appliances. All electrical appliances, such as ship lights, radios, air conditioners, etc., need to be turned off before starting the engine. Two. Light the fire. Find the battery circuit breaker at the stern of the ship and cut off the circuit breaker. 3. Push the accelerator to the minimum. Find the throttle lever on the deck and push it to the minimum value of the scale. Four. Turn on the accelerator equalizer.Under the battery disconnector, find the throttle acceleration equalizer knob and rotate it clockwise to the end. 5. Open the engine cover. At the stern or central position, find the engine cover, turn on and run the fan to let the engine dissipate heat. 6. Turn on the oil pump. Find the oil pump knob on the deck, rotate it clockwise to the end, and turn on the oil pump. If the sound is normal, the oil pump will start working normally. 7. Step on the clutch. Stepping on the clutch is to prevent the engine from moving forward directly after starting. Eight. Step on the pedal gently. At this time, step on the pedal gently to let the oil flow into the engine, and then increase the accelerator. Nine. Start the engine. Find the electric starter next to the engine cover, turn the key to the strengthening coil position, and quickly turn to the thin coil position after the starter starts to start the engine. To sum up, no matter the carThe car is still a ship engine. The key to starting the engine safely is to accurately grasp the start-up steps and methods. Only in this way can the engine of the vehicle or ship achieve better working performance and better protect the safety of the user.

Contact Us
Phone：020-83484689